BCH Priming Tool Kit for Unclogging Canon PG-210 CL-211 PG-243 CL-244 PG-245 CL-246 PG-275 CL-276 (XL/Regular) Ink Cartridges
Precio:
Q155.00
Disponible.
Producto de Tienda Mundial
Ver detalle
Recíbelo entre: 03 de Junio al 13 de Junio
Recíbelo entre: 03 de Junio al 13 de Junio
Garantía:
Producto incluye garantía de Tienda Mundial
Elegible para
cuotas.
Cuotas Disponibles por banco
| Cuotas | Monto |
| 3 | Q53.99 |
| 6 | Q27.00 |
| 10 | Q16.43 |
| 12 | Q13.69 |
| 15 | Q11.11 |
| 18 | Q9.26 |
| 24 | Q6.94 |
| 36 | Q4.69 |
| 48 | Q3.67 |
| Cuotas | Monto |
| 3 | Q53.22 |
| 6 | Q26.93 |
| 10 | Q16.20 |
| 12 | Q13.56 |
| 15 | Q11.06 |
| 18 | Q9.21 |
| 24 | Q6.91 |
| 36 | Q4.63 |
| Cuotas | Monto |
| 3 | Q53.99 |
| 6 | Q27.13 |
| 10 | Q16.28 |
| 12 | Q13.56 |
| 18 | Q9.04 |
| 24 | Q6.78 |
| 36 | Q4.52 |
| Cuotas | Monto |
| 3 | Q53.99 |
| 6 | Q27.06 |
| 10 | Q16.43 |
| 12 | Q14.01 |
| 15 | Q11.21 |
| 18 | Q9.52 |
| 24 | Q7.27 |
| 36 | Q4.87 |
| 48 | Q3.67 |
| Cuotas | Monto |
| 3 | Q53.99 |
| 6 | Q27.00 |
| 10 | Q16.20 |
| 12 | Q13.50 |
| 15 | Q10.95 |
| 18 | Q9.21 |
| 24 | Q6.98 |
| 36 | Q4.67 |
| 48 | Q3.62 |
| Cuotas | Monto |
| 3 | Q54.64 |
| 6 | Q27.71 |
| 10 | Q16.62 |
| 12 | Q13.95 |
| 15 | Q11.37 |
| 18 | Q9.64 |
- FIX PRINTER REFILL PROBLEMS. Most inkjet printer refill problems are in three categories: air lock, clogged nozzles, or overfill. The BCH priming kit fixes these problems if your printer produces a blank page or has stripes after a refill.
- THIS IS THE CORRECT CLIP & ACCURATE SIZE. If the clips arent tight, they arent right. You need to adjust the pad a little to create a good vacuum. The size is not too small. The kit works for all printers that use cartridges listed in the title. Read below for more tips.
- SIMPLE, QUICK, AND CONVENIENT. The tool kit can draw a vacuum from the bottom of the cartridge and thus fix all three problems. The tool kit fits the cartridge tightly, and you need to align the cartridge in the center, push down and push forward. Instructions below.
- REMOVE AIRLOCKS. After a refill, air bubbles may temporarily block the printhead nozzles. To get rid of them, you may sit the cartridge for a few hours and do some head-cleaning. Or, you can use this tool kit to remove the air immediately.
- UNCLOG PRINTHEAD AND CORRECT OVERFILL. When the old ink dried and condensed inside the printhead, you can use this clip to draw the old gummy substance out and revive the printhead.If you overfilled the cartridge, you can use this tool to remove excessive ink.
Información del producto
- PID NWQ4ODBiZW
- Número de modelo B0973JRGVZ
- Garantía Producto incluye garantía de Tienda Mundial