FEMORO Hard Drive Reader IDE SATA to USB 3.0 + USB C Adapter, 3in1 Ultra Data Retrieval Converter Kit with 12V/2A Power Supply for Internal 2.5 SSD 3.5 HDD IDE SATA Blu-ray Drive - Modelo SATA IDE to USB+USB C
Precio:
Q260.00
Garantía:
Verifica las políticas de Tienda Mundial
Producto de Tienda Mundial
Ocultar detalles
Producto de importación, vendido por Amazon y transportado desde Miami. Cómpralo hoy y recibe en los próximos 6-14 días hábiles.
- Producto - Modelo SATA IDE to USB+USB C
- 2025 Updated Version: FEMORO team updated three parts of the hard drive reader：1. Extend the reader body to conveniently use 3.5 ide port; 2. Apply softer 4-pin cable; 3. Use Softer usb 3.0 cable
- FEMORO Hard Drive Kit: The sata and ide to usb adapter support 2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE, SATA/IDE Internal Blu-ray Drive. Design to data retrieve and data transfer
- Stable & High Speed Data Transfer: This hard drive reader apply USB 3.0 standard, and compatible backup with usb 2.0 standard port. The different hard drive enjoys different data transfer speed, specific speed please on the basis of reality
- Considerate Design: The hard drive adapter kit design LED indicator light shows Power and activity status. On/Off power Switch for Hard drives protection. For 3.5" IDE drivers and old SATA HDD, you need to connect 12V/2A power adapter and 4-pin power cable provided
- USB+USB C Design: This ide hard drive reader comes with a usb c adapter, the USB-C to USB adapter that plugs into the USB C port to match your laptop and is not limited by the computer model
- Professional Technical Team Support: Included usb cable*1, usb c adapter*1, 12V/2A power adapter*1, 4-pin power cable*1, manual*1, 12 months of after-sales. With a professional technical guidance team in place, we are fully prepared to answer any queries you might pose
- NOTE1: Please make sure on/off switch is off before connecting to hdd,incorrect connection may cause damage to your hard drive or electrical shock
- NOTE2: Please turn on the switch on ide adapter in the last step. If you want to use "a single" 3.5" old ide hard drive, you will need to set the jumper to "slave" before turning on the disk. For jumper settings, please refer to your hard drive manufacturers documentation
* Precio y unidades sujetos a revisión de Pacifiko
Información del producto
| PID | Y2Q0MGU1Nz |
| Número de modelo | B0CH37FQYX |
| Garantía | 7 días sujeto a las políticas de Tienda Mundial |
| UPC | LPNO344580822 |
Garantía y Soporte
Para más información sobre Garantías en Pacifiko visitar la siguiente pagina: Garantías