DykbRadio 30pin 40pin DP to EDP Driver Board Signal Adapter Board 2k 165hz 4k 144hz 8K for 30p 40p Computer LCD Display Screen (DP to EDP 30PIN) - Tamaño DP to EDP 30PIN
Precio:
Q210.00
Actualmente no disponible
* Precio y unidades sujetos a revisión de Pacifiko
- Producto - Tamaño DP to EDP 30PIN
- 30pin 40pin DP to EDP driver board signal adapter board 2k 165hz 4k 144hz 8K for 30p 40p Computer LCD display screen
- The initial state of the product is shutdown. The switch is achieved by short pressing. When the power signal is turned on, pressing the switch (<1s) indicates startup. Pressing it again indicates shutdown. The initial brightness of the startup backlight is 90%.
- It is prohibited to plug and unplug EDP cables with power. There is a possibility of damaging the screen. If you want to unplug the cables, you must first turn off the power in order. All ports must be unplugged before unplugging the EDP cables.
- TYPE-C USB is the power input, DP is the signal input, EDP30/40 is the signal output, (30PIN for 2LAN, 40PIN for 4LAN) can drive a 15W EDP screen, with a backlight voltage of 12V and a driving voltage of 3.3V.
- The C9 capacitor of PCBA serves as the sensitivity adjustment capacitor input port Users can adjust the sensitivity of all touch buttons by adjusting the capacitance value of the CAP port The recommended adjustment range is 102-103 Users should try to use polyester capacitors with an accuracy of 5% when using them Increasing the capacitance will increase sensitivity Reduce anti-interference ability; Conversely, reducing capacitance will decrease sensitivity Enhance anti-interference ability. (Us
Información del producto
| PID | MDQzN2M3Nz |
| Número de modelo | B0CR937CBM |
| Garantía | 7 días sujeto a las políticas de Tienda Mundial |
Garantía y Soporte
Para más información sobre Garantías en Pacifiko visitar la siguiente pagina: Garantías