Creality Hi Combo (A) 3D Printer, Multi Color 3D Printing with CFS, 500mm/s Print Speed 95% Pre-Assemble, XY Step-Servo Motor and Auto Leveling Build Volume 10.24×10.24×11.81 inch
Precio:
Q4,650.00
Actualmente no disponible
- Producto - Modelo Creality Hi Combo
- Multi Color Printing: Creality Hi Combo 3d printer, combines with a Hi 3d printer and a CFS. Which can fulfill the multi color printing, up to 16 colors with 4 CFS can be printed together. Single color printing is tedious, this printer brings you a new experience in printing job, increasing much fun in your life. An intelligent management of multiple filaments, no worry to paint your prints
- Easy Start to Print: Creality Hi is 95% pre-assembled, you can get it going in just 8 minutes after tightening only seven screws and some wiring. A strain gauge in the toolhead auto-probes the bed for an accurate leveling mesh, two independently motorized lead screws adjust the X-axis to the horizontal position, this auto leveling function saves your time in leveling process without any trouble. A simple quick guide that covers all necessary software setups and first-time calibrations. Even a beginner can nail it
- Fast Speed Boosted by FOC Step-servo Motors System: The X and Y axis of Creality Hi Combo are driven by step-servo motors with FOC algorithms. This has made ultra smooth motion possible for Hi Combo with a speed up to 500mm/s with a max acceleration of 12000mm/s²
- Upgraded Durable Direct Drive Extrusion: All-metal extruder gears are wear-resistant and long-lasting. Durable filament cutter can be magnetically pulled back into position after cutting. An integrated nozzle that is clog-free and allows quick swap. Also a built-in filament run-out sensor in the extruder, the usage of filament is now monitored more closely and precisely for run-out or breakage. Filaments can be unloaded or switched (with CFS) with less residual waste
- Upgraded Design: A responsive 3.2" touch screen that can be folded away for a smaller footprint and a boot-up quick guide to help you set everything ready. A webcam to capture time-lapse photography for sharing and to monitor print in real-time (built-in camera cap for privacy protection). Creality Hi has an RFID reader that, after scanning, automatically recognizes the color and filament type in use (for Creality RFID filaments only)
* Precio y unidades sujetos a revisión de Pacifiko
Información del producto
| PID | NzdkNGIxYW |
| Número de modelo | B0DR42JZWQ |
| Garantía | 7 días sujeto a las políticas de Tienda Mundial |
Garantía y Soporte
Para más información sobre Garantías en Pacifiko visitar la siguiente pagina: Garantías