Vehicle Loop Detector, PD132 Single Channel Inductive Vehicle Loop Sensor with Selectable Pulse Time, Loop Vehicle Sensor Detector for Safety Exit Gates and Traffic Control
Disponible.
Precio:
Q340.00
Garantía:
Verifica las políticas de Tienda Mundial
Producto de Tienda Mundial
Ocultar detalles
Producto de importación, vendido por Amazon y transportado desde Miami. Cómpralo hoy y recibe en los próximos 15-22 días hábiles.
- Producto
- PARAMETERS: Supply Voltage: 220VAC; Power: 4.5VA; Output Relays: 240V/5A; Frequency Range: 20 kHz to 170 kHz; Temperature Compensation: 50°C/ h; Reaction Time: 10ms; Sensitivity: Higher: 0.02%, High: 0.05%, Low: 0.1%, Lower: 0.5%.
- RESET SWITCH: The reset switch of this loop vehicle sensor enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection.
- SELECTABLE PULSE TIME: This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds. The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop.
- SENSITIVITY SET: This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles.4 sensitivity setting are available on the switches to allow flexibility in configuration.
- MAINLY USED FOR: The Vehicle Loop Detector is mainly used to detect the existence and passing of vehicles.which could be used for car parking lot, gate, traffic control. Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product.
* Precio y unidades sujetos a revisión de Pacifiko
Información del producto
| PID | YWJhMzJjYT |
| Número de modelo | B07PX2YDC2 |
| Garantía | 7 días sujeto a las políticas de Tienda Mundial |
Garantía y Soporte
Para más información sobre Garantías en Pacifiko visitar la siguiente pagina: Garantías